Transparent polyamide resin, with high mechanical
performances and resistant to most chemical agents,
oil, gasoline, fuel and a variety of solvents.
Internal screen made from white lacquered
Vertical oil level indicator with metal protection.
Used in oil tanks, fuel and hydraulic fluid power
units. It enables a good visibility, from both
sides. Its transparent body remains intact under
light and most climatic conditions.
The body is made by ultrasonic welding of the two
Inside the level gauge is fitted a white screen
with minimum and maximum level indication. The seal
is guaranteed by O-ring and rear flat gasket, in
NBR 70 Shore.
This model gives the possibility to check, at the
same time, the fluid level and the temperature by
means of a thermometer fixed to the internal
aluminium screen, scaled in degrees
The assembly can be made externally (by providing 2
threaded holes M10 or M12 on 76/127 mm centre
distance, tolerance ±0,3mm), or internally by means
of the flanged nut, provided with the equipment,
through 2 lain holes 10,2 mm(±0,2) or 12,2
mm(±0,2). Maximum suggested tightening torque 5 Nm.
Pressed steel casing external protection, with
black painted finish, available in version VL, with
side openings to allow the visibility from both
Avoid contact with alcohol-based solutions,
detergents containing alcohol in general,
anti-freeze liquids at high temperatures and hot
water over 90°C.
New model XL-T/CX made from special resin resistant
to fluid containing alcohol and XL-T/RB with
floating red ball to improve visibility of the
fluid level in case of light coloured liquids.